Thin-film high-voltage automotive resistors in 0805

Vishay has announced 0805 SMD resistors that combine 450V operation with ±0.1% tolerance and a temperature coefficient as low as ±10ppm/K. They are the TNPV0805 e3 series, introduced as part of the greater TNPV e3 series (table below) of automotive high-voltage thin-film flat chip resistors. “Typical applications for the AEC-Q200 qualified device will include voltage measurement in automotive ...

This story continues at Thin-film high-voltage automotive resistors in 0805

Or just read more coverage at Electronics Weekly

20W ac-dc converters are OVC III rated to 2,000m

Hot on the heels of a 10W family of PCB-mount ac-dc converters, Recom is introducing 20W versions, once again with OVC III insulation. RAC20E-K/277 modules have a 53 x 28mm footprint and ate 23mm tall above the circuit board – with these E-K parts dimensionally the same as the company’s K series converters, “but with ...

This story continues at 20W ac-dc converters are OVC III rated to 2,000m

Or just read more coverage at Electronics Weekly

Lindsley Ruth backs EW BrightSparks to help celebrate engineering

Since we first began EW BrightSparks, back in 2016, RS Components has been our partner throughout all the awards. A key part of that has been the valuable support of Lindsley Ruth, its CEO, who strongly identified the need to highlight the achievements of younger engineers within the industry. The good news is that Lindsley will be ...

This story continues at Lindsley Ruth backs EW BrightSparks to help celebrate engineering

Or just read more coverage at Electronics Weekly

Flexible jumper strips in surface-mount or through-hole

GTK is supplying through-hole and sirface-mount flexible jumper strips in a variety of pitches and lengths, with a choice of insulation type. “Flexible jumper strips offer OEMs a versatile method of connecting two PCBs and can tolerate repeated flexing,” said GTK connector specialist Maciej Gluzniewicz. “This is ideal for connecting PCBs in high vibration applications, ...

This story continues at Flexible jumper strips in surface-mount or through-hole

Or just read more coverage at Electronics Weekly

Automotive high-current flat wire inductors

ITG Electronics has introduced a line of high current flat wire inductors for automotive and industrial environments. Called the L201316Q series, it offers nine inductance choices from 1.00μH to 105μH, and emphasises high current capability with examples of 75A for the 11.6μH part and 25A for the 105μH inductor. These are both 30% inductance drop figures ...

This story continues at Automotive high-current flat wire inductors

Or just read more coverage at Electronics Weekly

Government pursuing space-based solar power

The government is embarking on a programme to develop technologies for beaming power from space. The feasibility of Space-Based Solar Power (SBSP) was studied in a report commissioned last year by the Department for Business, Energy and Industrial Strategy. “Following the publication of this study, my department is developing a small-scale ‘no-regrets’ innovation programme to ...

This story continues at Government pursuing space-based solar power

Or just read more coverage at Electronics Weekly

Wording of EU Digital Markets Act finalised

The EU’s Digital Markets Act, which was finalised late last week, could constrict the power of the big US tech companies. Three examples of the rules to be imposed are: In online searches, companies would not be allowed to rank their own products or services higher than those of others. A user’s personal data cannot ...

This story continues at Wording of EU Digital Markets Act finalised

Or just read more coverage at Electronics Weekly

Wyld Connect hybrid terminals support sensor-to-satellite IoT

Wyld Networks has announced 2H 2022 availability of a new range of Wyld Connect low-power, sensor-to-satellite LoRaWAN terminals and modules for the IoT, aiming at areas where there is little or no alternative connectivity. The full service will be available in the second half of 2022, says the company, with a partnership with Eutelsat enabling ...

This story continues at Wyld Connect hybrid terminals support sensor-to-satellite IoT

Or just read more coverage at Electronics Weekly

Isotropic gears up for multi-link antenna product launch

It’s been a busy seven days for Isotropic Systems, the specialist in satellite connectivity whose radio frequency optics enable multi-link ground antenna to simultaneously connect to satellites in multiple orbits. The Reading-based company has announced its mobile Ka-Band GM2000 Terminal Range for military forces, and partnerships with Teledyne and SpaceBridge to extend the options for ...

This story continues at Isotropic gears up for multi-link antenna product launch

Or just read more coverage at Electronics Weekly

Cable interconnect for 112Gbps PAM4

Yamaichi Electronics and Japan Aviation Electronics Industry (JAE) have jointly developed a prototype of high-speed jumper cable interconnect product which supports the 112Gbps PAM4 signal on the data networking systems. Performance enhancement demand of data transmission speed on the network equipment such as the routers and switches is increasing with the expansion of 5G network ...

This story continues at Cable interconnect for 112Gbps PAM4

Or just read more coverage at Electronics Weekly