Analog Devices, has introduced millimetre wave (mmW) 5G front-end chipsets spanning 24 to 47GHz. There are two 16-channel dual-polarisation beam formers and two single channel (one Tx + one Rx) up-down converters. ADMV4828 24 – 29.5GHz 16-channel beamformer >12.5dBm output at 3% EVM with 400MHz 64QAM 5G NR waveform 310mW/channel ADMV4928 37 to 43.5GHz 16-channel beamformer ...
This story continues at 24 to 47GHz 5G front-end chipset
Or just read more coverage at Electronics Weekly
Synopsys has picked Microsoft’s Azure HBv3 cloud to offer pay-as-you-go on-line IC design and verification electronic design automation (EDA) tools, to be called Synopsys Cloud. “As more design flows incorporate AI, requiring even more resources, the virtually unlimited compute and EDA access we’re providing will deliver a flexible, secure chip development environment for future demands,” said ...
This story continues at Synopsys launches pay-as-you-go chip design and verification tools on Azure
Or just read more coverage at Electronics Weekly
P-Duke is aiming at rail and industrial use with a family of 20W 25.4 x 25.4mm dc-dc converters with wide input ranges. Depending on part, they take 9 to 75Vdc, or 14 to 160Vdc, and turn that into single or dual outputs of 5, 5.1, 12, 24, ±12 or ±15Vdc. “Using just one dc-dc model converter for ...
This story continues at 20W dc-dc converters with 1 x 1inch footprint for railways
Or just read more coverage at Electronics Weekly
Mikroelektronika has releases a set of Toshiba bipolar stepper motor drivers on Click boards for evaluation and development. There are nine of them with integrated H-bridges are capable of driving up to 50V at 4A. The ICs are footprint compatible – although some have phase inputs, the others have step and direction inputs. The single-supply devices ...
This story continues at Toshiba motor drivers on Click boards
Or just read more coverage at Electronics Weekly
Link Microtek has released a rotary microwave joint with three X-band channels, one for transmit and two for receive signals. Called AMCORJD-3, it is for antennas rotating continuously “at in excess of 60rpm and typically exposed to harsh environmental conditions such as wind, rain and salt spray,” according to the company. “The design brief was that ...
This story continues at UK made: triple-channel X-band rotary joint
Or just read more coverage at Electronics Weekly
Vishay has announced 0805 SMD resistors that combine 450V operation with ±0.1% tolerance and a temperature coefficient as low as ±10ppm/K. They are the TNPV0805 e3 series, introduced as part of the greater TNPV e3 series (table below) of automotive high-voltage thin-film flat chip resistors. “Typical applications for the AEC-Q200 qualified device will include voltage measurement in automotive ...
This story continues at Thin-film high-voltage automotive resistors in 0805
Or just read more coverage at Electronics Weekly
Hot on the heels of a 10W family of PCB-mount ac-dc converters, Recom is introducing 20W versions, once again with OVC III insulation. RAC20E-K/277 modules have a 53 x 28mm footprint and ate 23mm tall above the circuit board – with these E-K parts dimensionally the same as the company’s K series converters, “but with ...
This story continues at 20W ac-dc converters are OVC III rated to 2,000m
Or just read more coverage at Electronics Weekly
GTK is supplying through-hole and sirface-mount flexible jumper strips in a variety of pitches and lengths, with a choice of insulation type. “Flexible jumper strips offer OEMs a versatile method of connecting two PCBs and can tolerate repeated flexing,” said GTK connector specialist Maciej Gluzniewicz. “This is ideal for connecting PCBs in high vibration applications, ...
This story continues at Flexible jumper strips in surface-mount or through-hole
Or just read more coverage at Electronics Weekly
ITG Electronics has introduced a line of high current flat wire inductors for automotive and industrial environments. Called the L201316Q series, it offers nine inductance choices from 1.00μH to 105μH, and emphasises high current capability with examples of 75A for the 11.6μH part and 25A for the 105μH inductor. These are both 30% inductance drop figures ...
This story continues at Automotive high-current flat wire inductors
Or just read more coverage at Electronics Weekly
Secured Linux on Arduino for enterprise users is the aim of a tie-up between UK-based Foundries.io and the Arduino organisation. The chosen hardware is the new multi-core Arduino Pro Portenta X8, which is a processing heavyweight with quad Arm Cortex-A53 cores, a Cortex-M7 and two Cortex-M4 cores. “Today, you cannot think about a Linux-based device ...
This story continues at Multi-core Arduino and Linux for enterprise IoT
Or just read more coverage at Electronics Weekly
