Author Archives: steve bush

Waterproof micro USB and USB Type-C connectors

CUI has announced waterproof USB connectors rated at IP67. Offering protection from moisture and environmental contaminants, USB Micro B and Type C receptacles are available, conforming to either the USB 2.0 or USB 3.1 Gen 2, depending on model. Surface mount and mid-mount SMT types are available in vertical or horizontal orientations, with several models including ...

This story continues at Waterproof micro USB and USB Type-C connectors

Or just read more coverage at Electronics Weekly

One-board dev kit has three snap-off 8pin STM8 Microcontrollers

ST Microelectronics has introduced a development kit that allows potential users to evaluate all three or its 8pin STM8 microcontroller variants, and the no-frills board is nominally priced at $8.50. The board, called STM8-SO8-DISCO, includes STM8S001J3M3 (1kbyte ram, 128byte data eeprom) 16bit timers with three comparator outputs, three capture-compare channels, a 10bit ADC, and an 8bit ...

This story continues at One-board dev kit has three snap-off 8pin STM8 Microcontrollers

Or just read more coverage at Electronics Weekly

Four-line common-mode choke mounts on PCB

For filtering three-phase and neutral on circuit boards, Schurter is offering the DKIH-4 series of four-line common mode chokes using nano-crystalline ring cores, with ratings from 10A to 40A. “The power section is increasingly being mounted on the printed circuit board with discrete components,” according to the firm. “However, due to the high integration density ...

This story continues at Four-line common-mode choke mounts on PCB

Or just read more coverage at Electronics Weekly

Shock and vibration tolerant DC-DC converters for industrial and railway

Murata’s IR series of dc-dc converters are designed specifically for use in industrial and railway applications. Models include: IRQ100 series 100W single regulated output industry-standard quarter brick IRH150 series 150W single output IRS50 series 50W sixteenth brick IRQ and IRH products deliver regulated outputs of 5, 12, or 24Vdc, from a 3:1 input range of ...

This story continues at Shock and vibration tolerant DC-DC converters for industrial and railway

Or just read more coverage at Electronics Weekly

One chip adds security to IoT end nodes

Maxim is claiming simple route to protecting sensitive data in IoT end-nodes with a pair of security supervisor chips. Called MAX36010 and MAX36011, “these make it easier for designers to implement robust tamper detection, cryptography and secure storage while safeguarding sensitive information via logical and physical protections, without having to be security experts themselves – that ...

This story continues at One chip adds security to IoT end nodes

Or just read more coverage at Electronics Weekly

Osram’s second-generation headlight lasers

Osram has released the second generation of blue multi-mode laser diodes for car headlights, doubling range in auxiliary high beams compared to with its previous lasers, to 600m, it claims. What lasers offer over LEDs as a light source is higher light output per unit area (luminance) – which then allows a slimmer smaller optical ...

This story continues at Osram’s second-generation headlight lasers

Or just read more coverage at Electronics Weekly

Bridging PCIe to Ethernet AVB and TSN for automotive

Toshiba has announced an automotive chip that can bridge between PCIe and two Ethernet standards: Ethernet AVB and Ethernet TSN, to connect central processors to telematics, infotainment and driver assistance systems, as well as sensors, at up to 1Gbit/s. Called TC9562XBG, “it’s not just a simple hardware-bridge between PCIe and Ethernet”, Toshiba Electronics Europe told ...

This story continues at Bridging PCIe to Ethernet AVB and TSN for automotive

Or just read more coverage at Electronics Weekly

Cable tie mounts with ‘high-performance’ adhesive

From HellermannTyton, come two families of cable tie mounts which can operate at up to 105°C, which are now available in Europe through TTI. SolidTack MB are for flat surfaces FlexTack are for curved and bent surfaces (2D curves, not 3D), without resorting to thick layers of glue. “These self-adhesive mounting bases feature a high-performance acrylic ...

This story continues at Cable tie mounts with ‘high-performance’ adhesive

Or just read more coverage at Electronics Weekly

Hex-core mini-ITX industroal motherboard

Taiwanese single board computer maker Aaeon has launched a hex-core industrial mini-ITX motherboard using ‘8th generation’ (Coffee Lake) Intel Core processors hyper-threading – fewer cores are also available. Called MIX-H310A1, “increased core count and the refined graphic engines meet the requirements for graphic-intensive and high-performance computing applications in machine vision, kiosk and robotics,” said the ...

This story continues at Hex-core mini-ITX industroal motherboard

Or just read more coverage at Electronics Weekly

600V Super-Junction mosfets for bridge and ZVS converters

STMicroelectronics’ DM6 600V mosfets contain a fast-recovery body diode to bring super-junction technology to full-bridge (and half) phase-shifted zero voltage switched (ZVS) converters – and other applications that need a robust diode to handle dV/dt. “Leveraging ST’s carrier lifetime control technology, the mosfets have reduced reverse-recovery time [trr] to minimise power dissipation in the diode ...

This story continues at 600V Super-Junction mosfets for bridge and ZVS converters

Or just read more coverage at Electronics Weekly