Author Archives: steve bush

8th generation CoBs from Bridglux hit 185 lm/W

Bridgelux has announced its eighth generation of its chip-on-board products, delivering up to 185 lm/W from its V, Vero and Vero SE (pictured) Series families at nominal drive current – a 10% efficacy improvement over its previous product generations, it said. “This performance is benchmarked at the 3,000K 80CRI colour point. Efficacies above 200 lm/W ...

This story continues at 8th generation CoBs from Bridglux hit 185 lm/W

Or just read more coverage at Electronics Weekly

GaN ac-dc chips cover 27W to 55W without heatsink

Power Integrations has back-filled its InnoSwitch3 range of ac-dc power supply chips with 750V GaN power transistors – it already uses GaN transistors at the higher-powered end of the range. “PowiGaN technology permits manufacture of 94% efficient power supplies suitable for regions with frequent brown-outs and line surges,” said the company. “This enables OEMs to ...

This story continues at GaN ac-dc chips cover 27W to 55W without heatsink

Or just read more coverage at Electronics Weekly

Differential input Wi-Fi connected PC scopes reach 250MHz

Netherlands-based PC scope firm TiePie has introduced a four channel Wi-Fi connected display-free oscilloscope with differential inputs. It is the WiFiScope WS6 DIFF, which comes in three versions. The top end one, nominally 1Gsample/s has. 250MHz bandwidth 1Gsample/s, but see note* 8, 12, 14 or 16bit resolution 1Mpoint/channel data buffer (expandable to 256Msample/chan with XM option ...

This story continues at Differential input Wi-Fi connected PC scopes reach 250MHz

Or just read more coverage at Electronics Weekly

Nexperia USB4 ESD clamp adds only 100fF

Nexperia has managed to achieve 100fF load capacitance in devices designed to protect USB4 signal lines. “Of special interest to engineers designing USB4 and Thunderbolt interfaces, the new device uses Nexperia’s TrEOS ESD protection technology with active silicon-controlled rectification,” according to the firm. “It delivers a combination capacitance down to 0.1pF), dynamic resistance down to 0.1Ω ...

This story continues at Nexperia USB4 ESD clamp adds only 100fF

Or just read more coverage at Electronics Weekly

Reed relay switches 1kV in compact SIL package

Pickering has created a high voltage reed relay, that can stand off 1.5kV and switch up to 1kV. Called Series 131, they are single pole (normally-open) single-in-like devices with a 12.5 x 3.7mm footprint and 6.6mm height. The high voltage rating is specified with resistive loads. “At these high voltages, even stray capacitance can generate ...

This story continues at Reed relay switches 1kV in compact SIL package

Or just read more coverage at Electronics Weekly

When portable batteries get big

Mobile High Power Charger, is a large battery on wheels. There are two of them, built in into lorry trailers, together capable of delivering a total of 3.2MW – 320kW to each of 10 electric vehicles simultaneously. “Considering the availability of grid connections, which are often only limited, it is a unique opportunity to provide ...

This story continues at When portable batteries get big

Or just read more coverage at Electronics Weekly

Pole-mounted server is sealed to IP65

Supermicro introduced a sealed pole-mounted server for 5G and ‘intelligent edge’ applications at Embedded World last week. Sealed to IP65, inside is a choice of Intel Xeon D or 2nd Gen Xeon Scalable processors, and three PCI-E expansion slots for GPU or FPGA accelerator cards. For example, the Xeon D-2183IT is a 100W TDP processor ...

This story continues at Pole-mounted server is sealed to IP65

Or just read more coverage at Electronics Weekly

Converted red LED cuts temperature droop for car rear lights

Osram has created a phosphor-converted red LED for car rear combination lamps – for fog lights, for example. It has moved to phosphor conversion, rather than native red emission, to beat temperature droop. The part is called Synios P2720 CR – the initials for ‘converted red’. “One of the main issues with monochromatic LEDs for ...

This story continues at Converted red LED cuts temperature droop for car rear lights

Or just read more coverage at Electronics Weekly

Gap filling thermal compound pours in

Electrolube has launched a pair of thermal gap fillers to improve heat transfer. GF300 offers 3.0W/m.K conductivity GF400 offers 4.0W/m.K They are both silicone-based and two-part – requiring a 1:1 mix from a 400ml double-plunger cartridge using hand or machine application. GF400 is also available in a 50ml version. Consistency is a soft flexible putty, ...

This story continues at Gap filling thermal compound pours in

Or just read more coverage at Electronics Weekly