Author Archives: steve bush

Photo relays trigger at 2mA

Toshiba has launched two normally open 1-form-A photo-relays that do not need more than 2mA through the input to operate. The input current “reduces energy consumption by approximately 33% when compared to existing Toshiba products such as the TLP240x series”, according to the company. There are two parts: TLP223GA 400Vmax 120mA 17Ω output turn-on 1ms ...

This story continues at Photo relays trigger at 2mA

Or just read more coverage at Electronics Weekly

5kW building automation motor is web-enabled and comes with an app

Californian Motor maker Turntide has extended control of its machines into the internet for building automation. Announced at the AHR Expo building automation exhibition in Las Vegas this week, ‘Turntide for Strategic Machines’ integrates the company’s recent pancake-style ‘TX’ motor, its controller and app. The motor is IoT-enabled for automated commissioning, remote monitoring, fault detection and to make ...

This story continues at 5kW building automation motor is web-enabled and comes with an app

Or just read more coverage at Electronics Weekly

0.65mΩ 60V mosfet shrunk for telecom and industry, and an 80V one too

Vishay has introduced two n-channel TrenchFET mosfets for telecom and industrial applications. 60V SiJH600E and 80V SiJH800E operate up to +175°C and come in the company’s ~8 x 8mm PowerPak 8x8L package, which has no-bondwire construction for board-level reliability and gullwing leads for mechanical stress relief. On-resistances are typically 0.65mΩ and 1.22mΩ respectively at 10 V. Vishay claims ...

This story continues at 0.65mΩ 60V mosfet shrunk for telecom and industry, and an 80V one too

Or just read more coverage at Electronics Weekly

Dual 3A output dc-dc runs from 4 to 16V

Analog Devices has created a dual 4V to 16V in 3A output switching regulator for use with 2-serial and 3-serial batteries, and USB-C rails . Called MAX77540, it comes in a 2.5 x 2.3mm 30bump wafer-level package and peaks at 94% efficiency when converting 7.4V to 3.3V. Outputs can be set between 500mV to 5.2V, and the two ...

This story continues at Dual 3A output dc-dc runs from 4 to 16V

Or just read more coverage at Electronics Weekly

3.6GHz handheld spectrum analyser

Distributor Saelig has introduced the Owon HSA10000 handheld RF spectrum analyser range, covering 9kHz to 1.6GHz or 3.6GHz with 1Hz resolution. “The series has a very low -160dBm DANL which allows accurate low-noise measurements of even very weak signals,” according to Saelig. “An optional tracking generator can sweep over 100kHz to 3.6GHz.” EMI pre-compliance testing with ...

This story continues at 3.6GHz handheld spectrum analyser

Or just read more coverage at Electronics Weekly

Elastomer electrolyte to sort out lithium metal batteries?

Elastomer electrolytes might be the answer to safe lithium-metal batteries, according to researchers at the Georgia Institute of Technology. Batteries using lithium metal anodes rather than lithium ions promise high capacities, but a tendency to grow internal cell-shorting spike-like metal dendrites makes them a risky, or even unsafe, proposition if liquid electrolytes are used. Solid ...

This story continues at Elastomer electrolyte to sort out lithium metal batteries?

Or just read more coverage at Electronics Weekly

3A 5way IPx7 connector can absorb misalignment

Yokowo has developed a waterproof blade and receptacle connector with floating contacts to absorb mating misalignment, vibration or shock. Spring-loaded dual-beam contacts absorb contact displacement – 0.3mm laterally (left-right in the photo insert), for example. The base of the connector is ~22mm long (including small tags). Contacts are rated at 3A with 50mΩ contact resistance and a life ...

This story continues at 3A 5way IPx7 connector can absorb misalignment

Or just read more coverage at Electronics Weekly

860W quarter-brick dc-dc converter

Flex Power Modules has introduced a non-isolated regulated quarter-brick dc-dc converter rated at 860W continuous and 1,200W peak for <1s. Called BMR350, it is aimed at intermediate bus conversion for processors and asics. Input range is 40 – 60V (80V for 100ms) and the output is 12V at 100A maximum, adjustable from 8 to 13.2V. ...

This story continues at 860W quarter-brick dc-dc converter

Or just read more coverage at Electronics Weekly

Tiny load switch controls 1A for wearables and IoT

Toshiba has launched tiny load switches for wearables and IoT that consume only 80pA quiescent current – the Electronics Weekly calculator makes that 300,000 years from a CR2030 coin cell. They come in the company’s 0.65mm x 0.65mm WCSP4G package that is only 0.45mm and can switch up to 1A (2A pulsed). On-resistance varies from 46mΩ ...

This story continues at Tiny load switch controls 1A for wearables and IoT

Or just read more coverage at Electronics Weekly